Showing posts with label table decorations. Show all posts
Showing posts with label table decorations. Show all posts

Wednesday, March 18, 2015

Custom Made Turquoise & Gold Nightstand

I want to start off by announcing the Cutting Edge Stencil Give Away Winner

Congrats to "Nicki P"

If you missed out on this months "Giveaway", don't worry....
We have another fun one coming up next month!!


For today's How-To I want to show you a fun project in the Girls Modern DIY Room Makeover.

Custom Made Turquoise & Gold Nightstand



This fun table is super simple to make, and totally customizable! 
All you need is a few basic pieces, and a great combo of paint colors. 

Here are the supplies. 
*A Round 1"x18" Stain Grade Wood Panel. I picked up this one at Lowe's for $11.
*3 Waddell 21" Traditional Wood Table Legs. From Lowe's for $5 each.
*3 Angled Top Table Leg Plates. Under $6 for all three.
*Measuring Tape
*Electric Screw Driver
*Paints/Stains


The wood top is a pre-made piece that Lowe's sells. They come in several shapes and sizes, so you'll have lots of options for any style table. I like that the wood is stain grade, and the edges are finished. You can cut your own, but for $11 it's worth it to skip that part. 


I prefer the angle plates here, because the legs will spread outwards, not straight down. If your making a coffee table, or something not as girly, you could go with a flat plate.


The legs come in several styles. At the top there is a screw, so they can attach to the plates.


These were still a bit long for me, so I chopped a bit off the bottom. I measured one, then lined the rest up to mark them at the same spot. They are small, so either a hand saw or an electric saw will work well.



Here is what the angle of the plate looks like. It just pushes the leg out ever so slightly.  


You can see how the leg has the screw at the top. 



You'll  need to measure out the three plates on the back. I set the screw holes around 1"-1.5" away from the edge. You can use 4 if you don't want it to be so dainty looking.


Screw the plate into place. The screws come in the plate package.




Attach the legs. 




Could that be any simpler??


Next comes the paint. 
The options are endless here....Though I do love the metal colored band around the edges. You could mix in gold with pinks, or coppers with neutral tones. You could even do a tone-on-tone here, and stick in the same color palette. Adding glitter just to the edges with some glitter glue instead of paint, would be a fun way to glam it up as well.


You don't need very much paint here. 
I just used the sample size of paint. Which are under $3. 


Brush it on in the direction of the grain. 


Don't worry about the edges if you'll be painting them a different color. 




I used this gold paint, which is very rich in color, and only required one coat. It is on the pricey side. You can use tubes of acrylic paint from your local craft store as well, and for under $2 a bottle. 


The easiest way to get a good sharp edge, is to have your brush be about as thick, or thicker than your table width. Don't tape the top.  The fresh paint WILL pull off if you put tape on it. You'll have to hand do his part. Don't worry about getting it on the top, you can touch that up later. 




For the legs, I went with a washed out grey tone. The same color was n some of the fabric, and I didn't want them to have a painted look.  


Wearing gloves, dip a rag in the stain. 


Wipe it on each of the legs, making sure to saturate the seams and indentions. 
It is always best too wipe in the direction of the grain.



You could add more coats, if your color isn't dark enough. Let them dry for 12-24 hours in between coats. 




Here is the final product...


Simple, yet a good pop of color. 




I just love the mix of turquoise and gold. 








Check out the rest of the How-To's from this room.....
Painted Laundry Basket, Painted Mirror


Monday, January 26, 2015

Living Room Reveal

So I wanted to show you the last place of our house that I hadn't really touched on....The living room.
We did a complete overhaul here too.


If we could have bought any kind of house, we would have picked something older, something with more character. But we had to be in a specific area for the school district, and were forced into a builder basic home. 


So the only thing to do, was make it into something that we wanted. Paint, and simple changes can help make a house into your dream home...but sometimes you need more. Making areas that are super simple look more custom can help you get there. In each room of our house, we changed a big part of the room, something that was permanent. In the living room, the floor was changed, which carried through to the whole lower floor. That wouldn't be enough though to set it apart from any other house. 


The fireplace was the most obvious in this room. It was a super ugly tiled surround, with a dinky mantel above it. 
I want to say this was an easy change, and when we were finished and look back, it seems like an easy change...but it was be messy and frustrating along the way. 



My husband found this antique mantel on Craigslist, a major deal! And it almost fit perfectly. The bigger problem was the tile surround. 


Luckily the tiles popped off pretty easy, it was the thin set left behind that made the mess. We dealt with this at our last house, so we knew what to do, and how to do it, but that didn't make it any easier. A scraping tool with a blade, took off most of the thin set, and a grinder tool with a heavy duty wire brush attachment, helped clean up the rest of the floor.
This makes a HUGE mess.....


....so prep your space, and wear goggles and a respirator.
Think, giant dust cloud inside your house.
 In the entry way we used plastic and tape, to block the upstairs from getting covered with the dust.


As far as the wall  goes, instead of trying to salvage the drywall, we just cut out the messy stuff, and replaced it. As you can see here below, only a little bit was showing. You don't need to be, or need to hire a professional drywall person here, it's very simple. I used a putty knife to fill in the new drywall area with a thicker than normal layer of joint compound ( you can but it in small quart tubs), covering a bit over the exsisitng wall as well. After drying, I gave it a good sand, and used a can of spray texture to lightly cover the area. We did repair the wall, before attaching the mantel to the wall. For the texture, you can try it on a piece of cardboard until you get a heaviness close to your existing wall. 


I knew I didn't want the mantel to be the solid white, like it was...but you never know what you will find underneath. I took a heavy gel stripper, and tried it on the side of the mantel at the bottom. Putting enough on to get through any layers of paint. It looked like it had only ever been a cream, and a white. So I went ahead and distressed the whole thing. I wanted it to look old, since we were going to all the trouble to install an old mantel. You could just paint it a solid color, but I wanted to see the age. I took the same heavy duty gel stripper, and worked in small areas at a time, just brushing enough on to cover the surface, then with a metal putty knife, I scraped away at it slowly. Not adding enough gel, and not pushing hard enough to take off all of the paint. I wasn't trying to get to solid wood here. My father in law was in town, and was a huge help at getting the paint off. Once it was to a look I liked, I took some sandpaper to it, just to clean up the surface, not to take off an paint. I took a tiny bit of stain to the decorative piece in the middle since the wood didn't have the same tone as the mantel itself. It was much lighter. This just enhanced it a bit so it didn't blend in. 


Once the mantel was attached and the walls were painted, you would think the piece was built with the home. If the mantel doesn't fit perfectly to your fireplace, you can always add a bit of wood, or molding to make it cohesive. 


Our theme to the house was a farm-house, meets beach-house. So we used a good mix of the two. Not all of our pieces we added were meant to be there for ever. Some, like our tv cabinet, were a temporary fix and didn't fit either theme. 



I'm a big fab of a full mantel space. Not everyone would agree, but I think you can get into a space not looking proportionate, or to simple with nothing on it. So I pile all sorts of old books, and beachy decor on. I had revamped this mantel probably 10 times in two years. The mirror was a generic mirror from Hobby Lobby, that I painted in a navy, and added a glaze to. 



LOVE this lantern, I found it at Target a few years ago, and loved the frosted lettering on the glass, and the galvanized look of it. I filled the inside with driftwood, instead of your typical candle. 


This sponge was one of my most favorite finds ever. Strangely from a restaurant gift shop at the coast...but I had to have it. I love the shape, though it is quite large, and was hard to find a spot for.  Using old nostalgic books (off clearance section) from the used book store, is the perfect way to prop up items, and give a varied height to a mantel. You don't want everything on the same level. 


This beautiful crock held some "faux" firewood. 


Since the living room was open all the way through to the kitchen, none of the pieces could be very heavy in color or pattern. Otherwise the room starts to feel heavy on one side or the other. Since we went with a white on the cabinets, we kept the large sectional sofa (from Ikea) in a similar color. This is by far the cheapest slip covered sectional you will ever find, at around $800. It has been comfy and has held up great. I would have loved a white (bleach-able) but my husband vetoed that from the get go.  We had a more formal linen colored slipcover before, and had just changed over to this softer, actual linen fabric cover. 


Our coffee table was made some time ago, inspired from a Ballard Designs table. We bought some old barn wood, and I cleaned it up, distressed it, and sealed it. Originally, I had made a wood frame base, and painted it to look like metal. When we moved into the house, the movers destroy the base, so we had a friend of my husbands makes us one out of steel. Painted it again, in an aged bronze finish. Costing less than $80 for the whole thing.



Window treatments can get expensive, so I just used yards of this red striped linen fabric. From Renees Fabrics on Etsy.


Hemming the tops, bottoms, and sides of each panel. I didn't really want them to close since we had blinds, so I made them to be thin panels.  


The chair and ottoman are also Ikea, with the red striped cover.
 Some antique boat paintings, done by family members, hang above the chair.


Since there wasn't much space by the chair for a side table, I used an antique metal milk jug as a spot to rest a glass. 




You can see how the space is just one long narrow room. So you have to be conscious of each piece, and how it balances the whole room out. I love a white base, and adding in pops of color. It makes it easy to change up the room, when your style or color choices change. We used lots of reds, and blues throughout our home. 


The floor was obviously the biggest change in the space, and unified the whole lower level. 


We have two small dogs, and instead of using a traditional dog bed in the space, I made them a custom bed. I found this antique wood wagon, at an antique store. What made this piece so great was that the sides came off, each panel, individually. 
My husband thought I was nuts when I brought it home!!
 He took off the wheels, and we added a 4"x4" block of wood to each side, where the wheels were previously attached. I gave them a quick wash of stain to match the rest of the wood. I took off one panel so they could get in and out of it. 


For the bed, I used a 1' thick piece of foam, cut to the size of the bottom. I found a kind sized pillow case, in a color similar to the wood. The case fit almost perfectly so I just left it as it was. Super easy to take it off and wash it. 
The dogs love it!!



There you have it...our farm-house meets beach-house styled living room!!